Vertical top-entry agitator
Contact Info
- No.4285 Shendu Highway, Pujiang Town, 200000
- 胡工
- 18001633556
- 15000845544@163.com
Top-Entry VerticalStirrer
I. Product Introduction
Top-Entry VerticalStirrer,Chemical MachineryStirrer,Stainless Steel Mixing and Stirring Equipment can be applied in fields such as biopharmaceuticals, biochemistry, food, nanomaterials, coatings, adhesives, daily chemicals, printing and dyeing, petrochemicals, and paper chemicals. This digital display electric stirrer is suitable for dispersion, stirring and other mixing processes in laboratories with multi-viscosity systems.
II. Add New Functions to Your Laboratory
1. Digital display
2. Powerful, vertical shape, humanized design
Improved performance and technology based on the reliable YK120 series, with stable motor power
3. Two speed gears (high and low speed), ranging from 60-2000rpm.
4. Penetration-type stirring paddle (only when fixed).
Equipment Parameters | Values |
Power supply | 220-240/100-115 V |
Motor power | 120W |
Stirring capacity (H₂O) | 20 L |
Motor input power | 70 W |
Motor output power | 35 W |
Speed display | LCD display |
Speed range | 60 - 2000 rpm |
Processing viscosity | 10000CP |
Stirring shaft output power | 26 W |
Allowable continuous operation time | 100 % |
Stirring shaft torque | 150 Ncm |
At 60 rpm, stirring shaft torque (overload) | 300 Ncm |
At 100 rpm, stirring shaft torque | 150 Ncm |
At 1000 rpm, stirring shaft torque | 24 Ncm |
Speed range I (50 Hz) | 60 - 500 rpm |
Speed range II (50 Hz) | 240 - 2000 rpm |
Speed range I (60 Hz) | 72 - 600 rpm |
Speed range II (60 Hz) | 288 - 2400 rpm |
Speed control | Stepless |
Stirring paddle fixation | Rotary chuck |
Rotary chuck clamping diameter range | 0.5-10mm |
Hollow shaft, inner diameter | 10.5 mm |
Hollow shaft (insertable when stopped) | Yes |
Bracket fixation | Extension arm chuck fixation |
Extension arm diameter | 13 mm |
Extension arm length | 160 mm |
Rated torque | 1.5 Nm |
Allowable ambient temperature | 5 - 40 °C |
Allowable relative humidity | 80 % |
DIN EN 60529 protection method | IP 20 |
External dimensions | 880× 294 × 212 mm |
Weight | 3.1 kg |
III. Optional Configurations
1. Four-blade propeller type - Standard stirring head, which makes the mixed medium flow axially from top to bottom with low shear force.
2. Three-blade propeller type - Makes the mixed medium flow axially from top to bottom, generating local shear force. Suitable for medium and high speed use.
3. Dissolution type - Makes the mixed medium generate radial flow from both top and bottom; the strong turbulence and high shear force formed can crush particles in the liquid. Suitable for medium and high speed use.
4. Centrifugal type - Double blades open as speed increases, suitable for use in narrow-mouth containers. Stirring effect is similar to that of four-blade propeller. Suitable for medium and high speed use.
5. Fan blade type - Generates tangential flow with low turbulence and good heat exchange performance, applicable to occasions requiring gentle stirring of media. Suitable for low and medium speed use.
6. Anchor type - Generates tangential flow, forming high shear rate at the edge, preventing the mixed medium from depositing on the container wall. Suitable for low speed use. It is ideal for stirring elements of medium and high viscosity fluids, applied in polymer reactions and dispersion of minerals in liquids.
7. Other special paddles - Various other types of paddles can be selected (to meet your special working conditions)
IV. Maintenance of Mechanical Stirrer
·1. The bearing bears all the load of the machine, so lubrication has a great impact on the bearing life, which directly affects the service life and operation rate of the machine. Therefore, the injected lubricating oil is required to be clean and the seal is good. The main oil injection points of this machine are (1) rotating bearings, (2) rolling mill bearings, (3) all gears, (4) movable bearings and sliding surfaces.
·2. The newly installed wheel hoop is prone to loosening, so it needs to be checked frequently.
·3. Pay attention to whether the working status of each part of the machine is normal.
·4. Pay attention to checking the wear degree of wear-prone parts, and replace the worn parts in time.
·5. The bottom frame surface of the movable device should be cleaned of dust and other substances, so that when the machine encounters materials that cannot be crushed, the movable bearing can move on the bottom frame to avoid serious accidents. 6. If the bearing oil temperature rises, stop the machine immediately to check the cause and eliminate it.
·7. If there is an impact sound when the rotating gear is in operation, stop the machine immediately to check and eliminate the fault before running again.
| Chemicals/Heat Transfer Equipment/Other Heat Transfer Equipment | |
